Satellite separation systems

Custom low-shock adapters for satellites weighing up to 300 kg.

Spacecraft adaptation and separation

  1. The satellite is secured by pressing the flange that stays on the spacecraft against the flange that stays on the upper stage with 12 levers.

  2. The retaining mechanism is released without pyrotechnics. Springs push the satellite away.

  3. Recording the moment the CubeSat SC separates from its bay and generating telemetry.

  4. The device fires and the spacecraft separates on a signal from the electronics unit.

Technical solutions and configurations

Key features

  • Shockless electromagnetic initiator
  • Spacecraft mass up to 300 kg
  • Redundant initiating device
  • Can be installed along the launch vehicle flight direction or perpendicular to it
  • High stiffness
  • Separation velocity 0.5 to 1.5 m/s
  • Total mass 19.0 ± 0.5 kg
  • Spacecraft-side ring mass up to 2.5 kg

Specifications

ParameterValue
Lower ring mass (upper stage side)16.5 kg
Initiation unit mass3 kg
Upper ring mass (spacecraft side)2.5 kg
Total mass19 kg
Spacecraft bolt diameter / count8 mm / 18 pcs
Mounting diameter (bolt holes)500 mm

How it works

  1. The initiation unit fires and releases the central ring
  2. The released central ring frees the retaining levers
  3. The released levers free the spacecraft ring

Separation system components

Satellite adapter (ring)

The launch container is part of the separation system, the interface between the launch vehicle and the spacecraft, used to adapt a group of CubeSat spacecraft to the launch vehicle and to separate them from it.

The launch container provides:

  • Separate 3U / 6U / 12U / 16U modules (depending on the configuration) for adapting and separating a group of CubeSats.
  • Mechanical interface parameters of each module that meet the relevant CubeSat specification.
  • Additional payload volume.
  • Rigid three-axis locking of each spacecraft during flight.

Electronics unit

The control unit manages the unlocking of the launch container doors.

  • Redundant electromagnetic initiator
  • Controlled release of the retaining mechanism

The control unit provides:

  • A control signal to the initiator on command from the upper stage
  • Confirmation of spacecraft separation